Preventing Frozen Pipes

11/13/2018 (Permalink)

Frigid winter temperatures can cause pipes to freeze. While we can’t control the weather, there are things we can do to prevent pipes from freezing. We’ve pulled together tips to help prevent frozen pipes and a list of suggestions for you to follow if they do.

Frozen water pipes and the damage they can cause are a reality for thousands of people each year. That’s especially the case when you are at below freezing temperatures for an extended period of time.

The Insurance Institute for Business & Home Safety says a burst pipe can cause more than $5,000 in water damage. That’s because the damage can be extensive.

To prevent pipes from freezing and causing major damage, follow these steps:

• Drain water from pipes that are likely to freeze. This includes your swimming pool and sprinkler water supply lines.
• Disconnect any hoses from the outside of your home, drain the hoses and store them in the garage. Make sure to close the indoor valves supplying these outdoor access points.
• Insulate the area around vents and light fixtures. This helps prevent heat from escaping into the attic.
• Seal any wall cracks. Be sure to pay careful attention to the areas around utility service lines.
• Open kitchen cabinets. This allows the warm air to circulate around the pipes.
• Keep the garage doors closed to protect water lines.
• Allow your faucets to drip cold water on the coldest days. The movement will make it harder for the water to freeze.
• Keep your thermostat at the same temperature day and night. Never let it fall below 55 degrees Fahrenheit when you leave your home.
• Ensure you have proper seals on all doors and windows.
• Place a 60-watt bulb in areas where you’re concerned about pipes freezing. Make sure there are no combustible materials near the bulb.
• Take swift action if the pipes located inside an exterior wall are freezing. Cut a hole in the wall toward the inside of the house to expose those pipes to warmer air.

Signs of frozen pipes One of the earliest signs of a frozen pipe is when no water comes out of your faucet when you turn it on. If you notice that, first head to the basement and check to see that the water is still turned on and that you don’t have a leak. Once you’ve confirmed these two things, continue your inspection to make sure one of your pipes has not burst.

If your search reveals that your pipes are frozen but none have ruptured, you have two choices:

1. Call a plumber to help thaw your frozen pipes. This is a good idea if you don’t think you can safely thaw the pipes yourself, you don’t know where the frozen pipes are or you can’t access the frozen area.
2. Attempt to thaw the frozen pipes yourself. Be aware this option can be dangerous if not done correctly.

If you attempt to thaw the frozen pipes yourself, keep the following tips in mind:

• Keep your faucet open. Water and steam will be created during the thawing process, and your pipes need an opening to discharge this. Keeping the faucet open also allows for moving water to run through the pipe, which will expedite the thawing process.
• Apply heat to the section of the pipe that is frozen. This can be done by wrapping an electronic heating pad around the pipe, scouring the area with a hair dryer or both. If you lack either of these items, using towels soaked in hot water will help as well. Never use a blowtorch, propane or kerosene heaters, a charcoal stove or any other open flame device to thaw your frozen pipes. You should also avoid using a space heater unless you are sure the area is clear of any flammable material.
• Continue applying heat until water flow returns to normal. Once you have successfully thawed the pipe, turn on other faucets in your home to check for any more frozen water pipes.

Make sure your home is protected. Contact our franchises SERVPRO of Gwinnett County South at 770-448-5782 to make sure you have the coverage you, your family and home need.